All integrations
PLM

Arena PLM (PTC) + Ignite Lean

Available now

Arena (PTC) is the SMB-favorite cloud PLM. Pull released parts + BOMs straight into builds and inspection.

REST API Webhooks

How the Connection Works

Arena PLM (PTC)
REST APIWebhooks
Ignite Lean
Into Ignite Lean
  • Released parts + revisions
  • BOMs
  • Drawings + specs
Back to Arena PLM (PTC)
  • As-built deviations
  • ECN feedback

How It Works

  1. 1Arena PLM publishes released items + BOMs via REST.
  2. 2Ignite Lean uses released revisions on the kiosk.
  3. 3As-built deviations and ECN feedback flow back to Arena.

Recommended Workflows

How Arena PLM (PTC) works best with Ignite Lean. These are recommended patterns: Ignite Lean fires the trigger, and how Arena PLM (PTC) routes it (which work group, which device, which rule) is configured to your IT setup.

Released BOM goes live on the kiosk
Trigger A new BOM revision is released in Arena PLM (PTC)
  1. 1The connector pulls the released BOM + drawings.
  2. 2Ignite Lean swaps the active BOM on next build for that product.
  3. 3Operators see the new revision and any required retrain.
No paper traveler reprint, no missed revisions.
As-built deviation closes the loop
Trigger An operator substitutes a component or notes an assembly deviation
  1. 1Ignite Lean captures the deviation against the build.
  2. 2The connector posts an as-built link back to Arena PLM (PTC).
  3. 3Engineering sees the deviation against the released revision and decides whether to ECN.
Engineering owns the design record and learns from every build.

Connect Arena PLM (PTC) today

This works now through our REST API, outbound webhooks, and Excel/CSV. Start with the API reference, or talk to us about a guided setup.

API ReferenceTalk to Us