Skip to main content
All integrations
Vision + Inspection

Banner Engineering Vision + Ignite Lean

Available now

Banner smart cameras run many error-proofing applications. Bridge their results to builds.

REST API Webhooks

How the Connection Works

Banner Engineering Vision
REST APIWebhooks
Ignite Lean
Into Ignite Lean
  • Pass/fail + scan results
Back to Banner Engineering Vision
  • Recipe context

How It Works

  1. 1Banner publishes results via REST / serial.
  2. 2Ignite Lean attaches to builds.
  3. 3Recipe context pushes back.

Recommended Workflows

How Banner Engineering Vision works best with Ignite Lean. These are recommended patterns: Ignite Lean fires the trigger, and how Banner Engineering Vision routes it (which work group, which device, which rule) is configured to your IT setup.

Inline inspection raises an NC instantly
Trigger A vision system flags a fail
  1. 1Banner Engineering Vision posts the fail result + defect image to Ignite Lean.
  2. 2Ignite Lean attaches it to the build and opens an NC.
  3. 3The line gates downstream steps until the NC clears.
Quality is enforced at the camera, not just after the fact.
Active recipe pushes to the camera
Trigger A build of a new product starts
  1. 1Ignite Lean pushes the active recipe / inspection model to Banner Engineering Vision.
  2. 2The camera switches to the right configuration automatically.
  3. 3Operators never select a recipe by hand.
No mis-set cameras, no false fails.

Connect Banner Engineering Vision today

This works now through our REST API, outbound webhooks, and Excel/CSV. Start with the API reference, or talk to us about a guided setup.

API ReferenceTalk to Us