Skip to main content
All integrations
PLM

Duro PLM + Ignite Lean

Available now

Duro is a fast-growing PLM for hardware startups. Push released BOMs into floor builds.

REST API Webhooks

How the Connection Works

Duro PLM
REST APIWebhooks
Ignite Lean
Into Ignite Lean
  • Released parts + BOMs
Back to Duro PLM
  • As-built deviations

How It Works

  1. 1Duro publishes parts + BOMs via REST.
  2. 2Ignite Lean uses released BOMs on the kiosk.
  3. 3As-built deviations route back to Duro.

Recommended Workflows

How Duro PLM works best with Ignite Lean. These are recommended patterns: Ignite Lean fires the trigger, and how Duro PLM routes it (which work group, which device, which rule) is configured to your IT setup.

Released BOM goes live on the kiosk
Trigger A new BOM revision is released in Duro PLM
  1. 1The connector pulls the released BOM + drawings.
  2. 2Ignite Lean swaps the active BOM on next build for that product.
  3. 3Operators see the new revision and any required retrain.
No paper traveler reprint, no missed revisions.
As-built deviation closes the loop
Trigger An operator substitutes a component or notes an assembly deviation
  1. 1Ignite Lean captures the deviation against the build.
  2. 2The connector posts an as-built link back to Duro PLM.
  3. 3Engineering sees the deviation against the released revision and decides whether to ECN.
Engineering owns the design record and learns from every build.

Connect Duro PLM today

This works now through our REST API, outbound webhooks, and Excel/CSV. Start with the API reference, or talk to us about a guided setup.

API ReferenceTalk to Us