Skip to main content
All integrations
Vision + Inspection

Hexagon Metrology (CMM) + Ignite Lean

Available now

Hexagon CMMs and PC-DMIS power dimensional inspection. Stream measurements to SPC.

REST API Excel / CSV

How the Connection Works

Hexagon Metrology (CMM)
REST APIExcel / CSV
Ignite Lean
Into Ignite Lean
  • Dimensional measurements
  • Report files
Back to Hexagon Metrology (CMM)
  • Inspection context

How It Works

  1. 1PC-DMIS exports measurements via Q-DAS or CSV.
  2. 2Ignite Lean attaches to builds and feeds SPC.
  3. 3Inspection context flows back.

Recommended Workflows

How Hexagon Metrology (CMM) works best with Ignite Lean. These are recommended patterns: Ignite Lean fires the trigger, and how Hexagon Metrology (CMM) routes it (which work group, which device, which rule) is configured to your IT setup.

Inline inspection raises an NC instantly
Trigger A vision system flags a fail
  1. 1Hexagon Metrology (CMM) posts the fail result + defect image to Ignite Lean.
  2. 2Ignite Lean attaches it to the build and opens an NC.
  3. 3The line gates downstream steps until the NC clears.
Quality is enforced at the camera, not just after the fact.
Active recipe pushes to the camera
Trigger A build of a new product starts
  1. 1Ignite Lean pushes the active recipe / inspection model to Hexagon Metrology (CMM).
  2. 2The camera switches to the right configuration automatically.
  3. 3Operators never select a recipe by hand.
No mis-set cameras, no false fails.

Connect Hexagon Metrology (CMM) today

This works now through our REST API, outbound webhooks, and Excel/CSV. Start with the API reference, or talk to us about a guided setup.

API ReferenceTalk to Us