All integrations
PLM

Onshape (PTC) + Ignite Lean

Available now

Onshape (PTC) is the browser-native CAD + PDM platform. Pull released parts straight into the kiosk.

REST API Webhooks

How the Connection Works

Onshape (PTC)
REST APIWebhooks
Ignite Lean
Into Ignite Lean
  • Released versions + assemblies
  • BOMs
Back to Onshape (PTC)
  • As-built links

How It Works

  1. 1Onshape publishes versions and assemblies via REST.
  2. 2Ignite Lean uses released versions on the kiosk.
  3. 3As-built links sync back to the document.

Recommended Workflows

How Onshape (PTC) works best with Ignite Lean. These are recommended patterns: Ignite Lean fires the trigger, and how Onshape (PTC) routes it (which work group, which device, which rule) is configured to your IT setup.

Released BOM goes live on the kiosk
Trigger A new BOM revision is released in Onshape (PTC)
  1. 1The connector pulls the released BOM + drawings.
  2. 2Ignite Lean swaps the active BOM on next build for that product.
  3. 3Operators see the new revision and any required retrain.
No paper traveler reprint, no missed revisions.
As-built deviation closes the loop
Trigger An operator substitutes a component or notes an assembly deviation
  1. 1Ignite Lean captures the deviation against the build.
  2. 2The connector posts an as-built link back to Onshape (PTC).
  3. 3Engineering sees the deviation against the released revision and decides whether to ECN.
Engineering owns the design record and learns from every build.

Connect Onshape (PTC) today

This works now through our REST API, outbound webhooks, and Excel/CSV. Start with the API reference, or talk to us about a guided setup.

API ReferenceTalk to Us