Skip to main content
All integrations
PLM

Siemens Teamcenter + Ignite Lean

Available now

Siemens Teamcenter is the enterprise PLM for aerospace, auto, and industrial. Push released BOMs to a leaner floor.

REST API Webhooks

How the Connection Works

Siemens Teamcenter
REST APIWebhooks
Ignite Lean
Into Ignite Lean
  • Released items + revisions
  • BOMs
  • Drawings
Back to Siemens Teamcenter
  • As-built deviations
  • ECN data

How It Works

  1. 1Teamcenter publishes data via Active Workspace REST + SOA.
  2. 2Ignite Lean uses released revisions on the kiosk.
  3. 3Deviations and ECNs route back to Teamcenter.

Recommended Workflows

How Siemens Teamcenter works best with Ignite Lean. These are recommended patterns: Ignite Lean fires the trigger, and how Siemens Teamcenter routes it (which work group, which device, which rule) is configured to your IT setup.

Released BOM goes live on the kiosk
Trigger A new BOM revision is released in Siemens Teamcenter
  1. 1The connector pulls the released BOM + drawings.
  2. 2Ignite Lean swaps the active BOM on next build for that product.
  3. 3Operators see the new revision and any required retrain.
No paper traveler reprint, no missed revisions.
As-built deviation closes the loop
Trigger An operator substitutes a component or notes an assembly deviation
  1. 1Ignite Lean captures the deviation against the build.
  2. 2The connector posts an as-built link back to Siemens Teamcenter.
  3. 3Engineering sees the deviation against the released revision and decides whether to ECN.
Engineering owns the design record and learns from every build.

Connect Siemens Teamcenter today

This works now through our REST API, outbound webhooks, and Excel/CSV. Start with the API reference, or talk to us about a guided setup.

API ReferenceTalk to Us